 Description >>
50/60 Hz Three- Phase AC Current Sensor
Dynamic Range from 10A to 100Amps
Meets IEC62053-21 class 1
Meets IEC 60044-1 class 0.1 Phase error < 5'
Very low temperature coefficient
Meets UL class B (130℃) thermal insulation system
Meets UL 94V-0
AC isolation resistance: 4KV for 60s
Max. operation voltage: AC660V
Application >>
? Electricity meter
? Recording
? Power monitoring
? Energy management
? Alternative energy monitoring
 Note >>
1. Output voltage is proportional to the derivative(di/dt)of the input current based on the Rogowski Coil principle.
2.All current and voltages assumed to be sinusoidal waveforms at Fr, the constant rated frequency in Hz, measured as RMS value.
3.Accuracy class per IEC60044-1Table 11.
4.Ipri=Rated primary current.
5.Iout=Rated secondary current.
6.Iprimax=Sensed max primary current.
7.Loutmax=Sensed max secondary current.
8.RL =Terminating resistance. Varying terminating resistance increases or decreases output Voltage /Ampers according to following equation RL =Vout*Nsec/Ipri
|
ABSOLUTE MAXIMUM RATINGS
|
| Operating free air temperature range |
-40℃ to 85℃ |
| Storage temperature range |
-40℃ to 100℃ |
| LEADS INFORMATION |
| UL2649 22AWG BLACK |
150CM±10MM |
| Terminal block |
RJ11 terminal |
Mechanical Specification >>
| 
]
